Pulley load cells P100/3W

PULLEY LOAD CELL

Features: The TRIO measuring unit is used to continuously measure the pull during production. The load cell is mounted on the central pulley.

Applications: coil winding machines, winding machines, unwinding machines, wire tensioner for any application that needs to measure the tension of wires, tapes, optical fibers, copper wire, steel, nylon and so on.

Click to enlarge image

Technical Specifications

Material	Aluminium
Nominal load	50, 100, 200, 500, 1000, 2000 g
Limit load	300 % F.S.
Breaking load	500 % F.S.
Supply voltage	14 – 30 V dc maximum
Output	0 - 10 Vdc
Output tollerance	0,2 % F.S.
Linearity	0,2 % F.S.
Hysteresis	0,03 % F.S.
Operating temperature	-20 / +70°C (-4 / +158°F)
Protection class	IP 54
Standard cable length	3 m – 4 x 0,25 (shield not connected to the load cell body)

MOUNTING OF THE LOAD CELL

General precautions to be followed in the installation and assembly of load cells:

Follow the direction of application of force on the load cell
Do not exceed the limits of the temperature as indicated in the data sheet
Do not remove labels from the load cell
Adequately protect the cables with sleeves or channels
Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
Do not carry out any welding on the mechanical structure after mounting the load cell
Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
Protect load cell from any dust accumulation with any appropriate means